2 in 1 Wireless Dog Fence & Training Collar - User Manual
Introduction
2 in 1 Wireless Dog Fence & Training Collar combines the functions of wireless dog fence system and remote control dog training function. Our system adopts the most advanced technology with 2.4GHz signal source which is much more accurate and stable than any other old versions in the market. The biggest available radius can reach up to approximately 800 feet which can meet most requirements of Pet training applications.
Work principle
- Remote dog training Mode
under this mode, user can train the dogs(up to 3 dogs) manually. Press shock/ vibration/speaker button to send different punishments to corresponding dog via every single channel.
- Wireless Dog Fence Mode
Under this mode, user can set a certain radius distance from controller to receiver for your dogs . Once the dogs get out of it, the fence system would trigger sound/shock/ vibration to dogs as what user set up . punishment get stop if the dogs get back to the circle . The radius distance is adjustable from 30feet/100feet/ . . …to 800 feet for level 1 to level 16.
Operate lllustration
Pre-Setting
- Pairing
No pairing is required between the controller and receiver when user receiver the product since it has been paired by producer.
Step 1:Press power button on both transmitter and receiver and the green light in the receiver flash slowly. Step2:Press M”button to switch to dog training mode. fash ---Wireless Fence mode stop flash---Training Collar Mode Step3:Press “CH” to select channel(1,2,3 display on screen).if you have 1 receiver please select 1. Step4:Press “CH” button and hold on (channel number flashy,also press receiver power button and hold on till hear the sound”Di~”from both receiver and tran smitte pairing success. - Intensity Adjustment
Step1:Ensure controller and all receiver is power on and pairing successfully. Or the receiver can not memorize the adjustment. Step2:Switch to Remote dog training Mode (the signal symbol stop flashing) Step3:Press shock button then press "+" "-" to adjust shock intensity.The intensity level dispaly on screen changed (level 0 to level 9),level 0 means no shock.
Press vibration button then press "+" "-" to adjust shock intensity.The intensity level display on screen changed(level 0 to level 9),level 0 means no vibration.
Remote Dog Training Mode
Remote training mode is to train the dog manually. user can press shock/ vibration/speaker button to send different punishments to corresponding dog via every single channel. Operate procedure:
| Step1：Press Mode button switch to "Remote dog training mode”(under this mode ,the signal symbol stop flashing) and the green light in the receiver flash slowly |
| Step2：Press"CH" button to select the dog(the number display on the screen) |
| Step3：Press shock button to send shock Press vibration button to send vibration Press speaker button to send sound |
Wireless Dog Fence Mode
User can set a certain radius distance from controller to receiver for
your dogs then put the receiver collar around the dog's neck as tight
as possible to let the conductive silicone point contact the skin of the
dog. Once the dogs get out of it, the fence system would trigger
sound/shock/ vibration to remind the dogs. After a period of training,
the dogs stay inside the circle consciously. The radius distance can
be adjusted from 30 feet to 800 feet.
The intensity for both shock and vibration is the same with what it is under "remote dog training mode". If user want to adjust the intensity,
just need to operate as "Intensity adjustment" in"Pre-Setting"
chapter.
Operate procedure:
|
Step1： Press Mode button to switch to "Wireless Dog Fence Mode". (under this mode, thě signal symbol keep flashing) |
|
Step2：Pres"+" or"-" to adjust proper radius distance from the controller to receiver depend practica situation. User would see the digit on screen from 1 to 16 which means the distance from 30 feet/100 feet … to 800 feet. Once the range set up, the wireless dog fence build up. Pet would be punished if they get out of it |
Working pattern:
The receive collar will not send any punishments when the dog is within the set range. When the dog is out of the set range, the receiving collar will work as
follows:
| The first punishment | sound 1 sec+ vibration and electric shock 1 sec (synchronized work), the receiver flash with a red LED light. |
| The second punishment send at 2 second later after the first punishment finished. | sound 1 sec+ vibration and electric shock 2 seconds (synchronized work), the receiver flash with a red LED light. |
| The third punishment send at 2 second later after the second punishment finished. | sound 1 sec+ vibration and electric shock for 3 sec (synchronized work), the receiver lights up red LED light |
| Further 10 minutes | Reminding the dog by sound |
Once the dog return to the set range, the receiver will stop working. When the receiver is not working for 2 minutes, it will automatically switch to standby mode , and the indicator light will flash every 3 seconds during standby.
Remark
1.Please use this device in an open area, the controller should be placed 3 feet. above ground at least to avoid barriers which will disturb radio signal.
2.Not recommended for aggressive dogs. DO NOT use this device if your dog is behaving aggressively.
3.If you are not sure that if this device is right for your dog, please talk to your veterinarian or a certified dog trainer.
4.No more than 12 hours per day to wear the receiver collar.
5.If a rash or sore is found, stop using the collar until the skin is healed. 6.Always keep dog's neck clean.
7.Keep this device away from children. 8,This device is intended to use for dogs only.
Specification:
Controller
With original power saving signal output strategy, the controller can have a fairly long battery life. USB charging DC 5V, 3.7V lithium battery 2000mah, battery icon on the LED screen will flash. when charging. the last red section will flash when battery is low. Full charge takes 4-5 hours for controller.
Receiver
With power saving mode, the receiver can have a long battery life. DC 5V,3.7V lithium battery 400mah. LED light will flash when the battery is low. It will need 2 hours for fully charge.
